Mobicon Systems manufactures compact straddle carriers and container handlers for logistics and transport operators. Move containers faster, cut handling costs, and work without fixed loading docks.
Logistics and transport operators deal with the same recurring pain points. Each one affects throughput, labour cost, and service levels. Mobicon straddle carriers are built to solve them directly.
Every minute a truck sits idle in your yard adds cost. Side-loaders need double the manoeuvring space to pick up or set down a container, which creates congestion during busy inbound and outbound windows. The Mobicon’s compact footprint keeps vehicles moving.
Reach stackers and container forklifts concentrate their full load across two axles, creating destructive point loads on yard surfaces. Cracked concrete and deformed bitumen means unplanned repair costs and disruption to daily operations.
Facilities built around fixed loading docks restrict container flow to specific bays. Dock construction is expensive, and those bays become bottlenecks during peak despatch periods. A Mobicon positions containers anywhere in the yard, making fixed docks optional.
Contracting a side-loader for every delivery adds a variable cost with no ceiling. Once it leaves, the container is stranded. A Mobicon eliminates that recurring hire cost and gives you full on-site repositioning capability.
A reach stacker needs wide access lanes and multiple movements to retrieve a specific container. A straddle carrier drives directly over the target, reducing the lane width and footprint required to run an efficient yard.
Unpacking containers outdoors exposes goods to weather and slows your team down. A Mobicon can position containers inside a warehouse or under a covered loading area so staff work in a sheltered environment regardless of conditions.
A Mobicon straddle carrier drives over the trailer, lifts the container, and places it anywhere in your yard. No fixed loading infrastructure. No excess manoeuvring. No unnecessary waiting.
The truck pulls into the yard. The Mobicon drives over the trailer and lifts the container clear in one pass. No loading dock, no ramp, and no dedicated staging area required.
The Mobicon carries the container to its storage bay, warehouse floor, or covered loading area. It can straddle over multiple trailers in sequence, making B-double and road train unloading straightforward.
Because the Mobicon handles placement without the double-space requirement of a side-loader, truck turnaround is faster. Less waiting means fewer demurrage charges and a lower cost per movement.
A side-loader delivers once and leaves. A Mobicon stays on-site. Move containers closer to where goods are being packed, restack for better yard density, or pull a specific container without disturbing the rest.
Depending on the model, containers stack two or three high. More containers fit in the same footprint, which reduces the need for yard expansion and increases total storage capacity.
Unlike reach stackers and forklifts, a Mobicon does not require a separate operator licence. That lowers onboarding costs and gives managers more flexibility when allocating yard staff.
Most operators evaluate four options for on-site container handling. Here is how the Mobicon compares against side-loaders, reach stackers, and container forklifts across the factors that matter in a working yard.
| Factor | Mobicon Straddle Carrier | Side-Loader | Reach Stacker | Container Forklift |
|---|---|---|---|---|
| Maneuvering Space | ✔ Minimal footprint | ✘ Requires double space | ✘ Large turning radius | ~ Moderate |
| Container Repositioning | ✔ Anytime, anywhere | ✘ Leaves after delivery | ✔ Yes | ✔ Yes |
| Works Without a Loading Dock | ✔ No dock needed | ✔ No dock needed | ✔ No dock needed | ✔ No dock needed |
| Yard Surface Protection | ✔ Lowest axle loads in the world | ~ Variable | ✘ High point loads | ✘ High axle loads |
| Container Stacking | ✔ Up to 3-high (model dependent) | ✘ Ground level only | ✔ Yes | ✔ Yes |
| Operates Under Awnings / Indoors | ✔ From 3.8m clearance | ✘ No | ✘ No | ~ Limited |
| Operator Licence Required | ✔ No licence required | ~ Varies | ✘ Licence required | ✘ Licence required |
| Cost Structure | ✔ Fixed capital cost | ✘ Variable per delivery | ~ High CAPEX + running costs | ~ Moderate CAPEX |
| Load Double / Triple Trailers | ✔ Straddles multiple trailers | ✘ No | ~ Limited | ✘ No |
Every Mobicon handles standard 20ft and 40ft containers with corner castings. Models are sized by throughput, from lower-volume depots through to high-volume distribution centres, so you invest in what your operation actually needs.
The 2T uses a bottom-lift design and fits through warehouse doorways from 3.8 metres clearance. Suited to smaller operations that need flexible placement without a fixed loading dock.
The 2TE is the battery-electric version of the Mobicon 2T. It delivers the same bottom-lift capability and indoor clearance performance with zero exhaust emissions, making it the right choice for enclosed facilities or emission-sensitive sites with lower container volumes.
The 2HL is a reinforced top-lift straddle carrier for busier yards. It stacks one container over another to increase storage density and lowers its height to work under covered loading areas with 5.8 metres of clearance.
The 2HLe delivers full 2HL capability with a battery-electric drivetrain. Zero exhaust emissions and lower running costs make it the right fit for enclosed facilities and operations with sustainability or emissions reporting requirements.
The 3H is built for high-volume operations where yard space is tight and weekly container movements are intensive. Three-high stacking maximises storage density without increasing axle loads or damaging yard surfaces.
The 3HE is the battery-electric version of the Mobicon 3H. It delivers three-high stacking at high throughput with zero exhaust emissions, suited to intensive operations that require maximum yard density alongside sustainability or emissions compliance.
Faster lifts and precise yard placement mean trucks leave your site sooner. Lower dwell time cuts demurrage exposure and helps your transport partners keep to schedule.
A Mobicon carries the container directly to where goods are being packed, whether that is a warehouse floor, a packing station, or a covered bay. Removing that double-handling step reduces labour hours per container.
Side-loader hire adds a variable cost to every delivery. Over time, that spend compounds. A Mobicon converts it into a single fixed investment, giving you cost predictability and full on-site container control. Weight-distributing bogies at each corner also protect light or standard bitumen yard surfaces from the point loads that heavy two-axle machines produce. The hydraulic lifting system carries no wire ropes, which eliminates swinging loads and rope hazards and keeps the machine stable and controlled on slopes and through tight areas of your depot yard.
A Mobicon does not require the licensing attached to reach stackers or forklifts. Any trained team member can operate it, reducing compliance costs and giving you more flexibility during peak periods.
Most container handling equipment is restricted to open yard use. Mobicon straddle carriers have adjustable height profiles so you can bring containers into a warehouse or under a covered loading bay, protecting goods from weather and giving your team a controlled environment for packing and unpacking.
The 2T carries a container through a standard warehouse doorway with as little as 3.8 metres of clearance. It is the only compact container handler in its class capable of working fully inside a warehouse building.
The 2HL and 2HLe lower their operating height to position containers under covered bays or awnings with 5.8 metres of clearance. The same machine works in the open yard or undercover, with no modification needed.
Every Mobicon model places containers precisely where you need them — indoors, outdoors, alongside packing stations, or staged at outbound loading points. Fixed dock infrastructure becomes a choice rather than a constraint.
Yard surface damage is one of the largest unbudgeted costs in depot management. Mobicon’s four-axle design distributes the combined weight of machine and container across four points instead of two, protecting standard surfaces from the damage that reach stackers and forklifts cause.
Reach stackers and forklifts concentrate their combined weight across two axles. Over time, that point loading cracks concrete and deforms bitumen. Mobicon spreads the load evenly across four axles, protecting your yard surface.
Lower axle loads mean no heavy-duty pavement construction or surface upgrades are needed. Standard concrete and bitumen surfaces handle daily Mobicon operation without issue.
For shared facilities with multiple tenants and high daily container movements, protecting pavement integrity reduces unplanned maintenance spend and avoids the downtime that comes with surface repairs.
Mobicon Systems backs every unit with a full after-sales programme. Unplanned equipment downtime directly affects throughput and client service levels, so support is built into every deployment.
Every Mobicon is backed by a manufacturer's warranty. Your depot operation has asset confidence from the day the unit is commissioned on site.
Any qualified forklift mechanic can carry out routine servicing. Engine, hydraulic, and electrical components are sourced through standard local supply channels, keeping equipment productive.
When Mobicon Systems commissions a new unit at your site, certified on-site operator training is included. Your team trains in your actual yard, using your containers and layout — not in a classroom.
Direct telephone support is available to resolve issues quickly, keeping your operation running with minimal disruption to despatch schedules and delivery commitments.
For sites in regional locations, Mobicon includes a tailored spare parts package with each unit. The right components are on hand when needed, without waiting on a delivery.
Mobicon Systems offers outright purchase and rental arrangements to suit different capital structures. Whether you are expanding your existing fleet or trialling the equipment before committing, there is an option to suit your operation.
Toll SPD, a division of the Toll Group, operates a multi-modal full container load transport network connecting capital cities and regional centres. At their Brisbane warehousing and distribution centre, managing inbound and outbound container flow across 30 daily movements had become a costly and inefficient operation.
The yard held up to 20 trailers at any time, most sitting idle as expensive container stands. Long-haul prime movers were waiting an average of three hours to be unloaded — a poor use of both the driver and the asset. The leased yard surface also ruled out reach stackers and container forklifts due to their axle loads.
After consulting with Mobicon Systems, Toll SPD deployed a Two Tower Mobicon Straddle Carrier. The Mobicon removed containers from arriving trailers immediately, swapped them for outbound loads in the same cycle, and eliminated the need for trailers to sit as container stands. Long-haul prime movers were turned around in 30 minutes instead of three hours.
“Toll SPD originally acquired a Mobicon in 1999 as it was the only container handler available on the market that had the flexibility to handle all sized containers and is designed with ideal wheel loadings suitable to our yards. We have since purchased another 4 Mobicons for our various depots.”
Toll SPD — Toll GroupSpeak with a Mobicon Systems specialist about the right model for your container volumes, yard layout, and operational goals. No obligation, just straightforward advice.
Mobicon straddle carriers handle any 20ft or 40ft container fitted with standard corner castings. That covers the full range of containers used in domestic and international freight operations.
Yes. A Mobicon straddles over multiple trailers in sequence, allowing it to load containers onto B-double and road train combinations in a single pass.
In most cases, no. Mobicon’s four-axle design produces the lowest axle loads of any container handler in the world. Standard commercial concrete or bitumen surfaces are sufficient without pavement upgrades.
Side-loader hire is a variable cost that grows with every delivery. A Mobicon is a fixed capital investment. At sufficient weekly volumes, it delivers a lower cost per movement and on-site repositioning capability that a contracted side-loader cannot match.
No. Unlike reach stackers and forklifts, a Mobicon does not require a separate equipment licence. Your team receives certified on-site training from Mobicon Systems at commissioning.
Yes. The Mobicon 2T operates through doorways from 3.8 metres clearance for full indoor use. The 2HL and 2HLe lower their operating height to work under covered bays with 5.8 metres of clearance, keeping packing and unpacking out of the weather.
Routine servicing can be completed by any qualified forklift mechanic using locally sourced components. Mobicon Systems provides telephone support and has trained service agents available to minimise downtime.
Yes. Mobicon Systems offers flexible rental arrangements alongside outright purchase. Contact the team to find the right arrangement for your volumes, budget, and planning horizon.
© All rights reserved