Is a Reach Stacker Too Much Equipment for Your Yard?


Reach stacker operating in a container yard aisle

A reach stacker is designed for demanding container handling operations. It provides substantial lifting capacity, reach and stacking capability. But not every yard needs that level of equipment.

For smaller operations, a reach stacker’s size, operating space and capacity may exceed the site’s actual requirements. In these situations, a smaller or differently designed container handler may provide a more practical fit.

The question is not whether a reach stacker can handle the containers. It is whether the equipment matches the operation.

Does Your Container Volume Justify a Reach Stacker?

Container volume is one of the first factors to consider.

Reach stackers are designed for intensive container handling. They can move and stack containers efficiently across larger operating areas.

A smaller operation may not use that capacity often enough to justify equipment designed for higher throughput.

If the yard handles a limited number of containers each week, consider how frequently the reach stacker’s full lifting and stacking capability will actually be used.

The right equipment should match the workload rather than the maximum workload you might handle in the future.

Does Your Yard Have Enough Operating Space?

Reach stackers need room to manoeuvre.

Their size, turning requirements and front-mounted telescopic boom require sufficient operating space around containers and other site infrastructure.

This can become a challenge in yards with:

  • Narrow access areas
  • Existing buildings
  • Warehouses
  • Loading areas
  • Fixed infrastructure
  • Limited container storage space

If the machine needs to manoeuvre around obstacles or operate within a restricted area, the available space should be assessed before purchasing.

A smaller or more compact container handling solution may provide greater flexibility where space is limited.

Are You Using More Yard Space Than You Need?

Equipment size can affect how a yard is organised.

A reach stacker needs sufficient room to approach, lift, manoeuvre and position containers. This operating footprint needs to be considered alongside the space required for container storage and vehicle movements.

A smaller yard may need to use its available space more efficiently.

A container handler that can operate within the existing layout can help avoid designing the entire yard around the equipment.

This is particularly relevant for industrial facilities, logistics sites and smaller container storage operations that do not operate like large container terminals.

Do You Need Extensive Stacking Capability?

Reach stackers can provide substantial stacking capability. But more stacking capacity is not always necessary.

Consider how containers are actually stored.

If the operation mainly requires ground-level handling or limited stacking, investing in equipment designed for extensive stacking may provide capacity that is rarely used.

The required stacking height should be based on the site’s storage requirements.

Mobicon offers different straddle carrier configurations for specific stacking needs. The Mobicon 2HL and 2HLe provide two-high stacking, while the Mobicon 3H and 3HE provide three-high stacking.

This allows the equipment to be selected around the required stacking configuration.

How Important Are Axle Loads?

The weight of heavy container handling equipment can affect the operating surface.

Mobicon uses a four-axle, eight-point load design to distribute the machine and container load across multiple contact points. This keeps axle loads low.

This can be relevant for yards where surface loading is an important consideration.

The suitability of any equipment still depends on the site’s actual surface, load rating and operating conditions.

Before purchasing a container handler, assess whether the existing yard can support the equipment without requiring unnecessary surface upgrades.

Does Your Operation Need a Large Container Handler?

A reach stacker can provide capabilities that are valuable in high-volume operations.

But those capabilities may not be necessary for every business.

A smaller operation may prioritise:

  • Compact operation
  • Lower axle loads
  • Flexible container positioning
  • Ground-level handling
  • Suitable indoor or covered operation
  • Simpler integration with an existing site

These requirements can point towards a different type of container handling equipment.

The goal is not to use the largest machine available. The goal is to use equipment that fits the way the yard actually operates.

What If Your Yard Has Different Container Handling Requirements?

Not every container operation handles standard containers in the same way.

Some operations may need to handle compatible specialised configurations such as flat racks or bolsters.

The Mobicon 2T and 2TE use a bottom-lift design for standard ISO containers and compatible specialised configurations, depending on the application. These models have a safe working load of up to 35 tonnes.

Other Mobicon models focus on standard container stacking.

The 2HL and 2HLe provide two-high stacking, while the 3H and 3HE provide three-high stacking.

Selecting the right model therefore starts with understanding the actual containers, loads and stacking requirements involved.

When Can a Straddle Carrier Be a Better Fit?

A straddle carrier can provide a different approach to container handling.

Instead of using a front-mounted telescopic boom, it straddles the container and carries the load within its frame.

This design can suit operations where space, axle loads and flexible positioning are more important than the high-volume capabilities of a reach stacker.

A straddle carrier may be worth considering when the operation:

  • Handles low to medium container volumes
  • Has limited operating space
  • Needs lower axle loads
  • Requires flexible container positioning
  • Handles containers around existing infrastructure
  • Needs suitable indoor or covered operation

The equipment still needs to be matched to the site’s conditions and handling requirements.

Reach Stacker or Straddle Carrier?

The choice should come down to the operation rather than the equipment category.

A reach stacker may be appropriate for high-volume container yards that require extensive stacking and large open operating areas.

A straddle carrier may be more suitable where the operation places greater importance on compact operation, lower axle loads, flexible positioning or lower container volumes.

Before making a decision, compare:

  • Container volume
  • Available operating space
  • Required stacking height
  • Yard surface and axle load requirements
  • Container types
  • Workflow between storage and transport

These factors provide a clearer basis for selecting equipment than lifting capacity alone.

How to Know If a Reach Stacker Is More Than Your Yard Needs

Ask whether you will regularly use the capabilities you are paying for.

If your operation handles a high volume of containers, requires extensive stacking and has sufficient space, a reach stacker may fit the application.

If the operation handles fewer containers, has restricted space or places greater importance on low axle loads and flexible positioning, a different container handler may be worth evaluating.

The objective is not to choose the smallest machine. It is to avoid selecting equipment that creates unnecessary space, surface or operational requirements.

Consider the Complete Operating Workflow

Equipment selection should account for the entire container movement process.

Consider how containers arrive, where they are stored, how they are moved and how they are loaded for transport.

A machine may have more lifting capacity than the operation needs but still create constraints elsewhere in the workflow.

For example, the required manoeuvring space can affect yard layout. Equipment weight can affect the operating surface. Stacking capability can affect how storage areas are designed.

Looking at the complete workflow helps identify which equipment characteristics actually matter.

Why Consider Mobicon Straddle Carriers?

At Mobicon Systems, we offer a range of straddle carriers designed for different container handling requirements.

Our range includes the Mobicon 2T and 2TE for applications requiring up to 35 tonnes safe working load and compatible specialised configurations, along with the 2HL, 2HLe, 3H and 3HE for two-high and three-high container stacking.

Our four-axle, eight-point load design distributes the machine and container load across multiple contact points, keeping axle loads low.

The compact straddle carrier design can also provide greater flexibility for suitable confined, indoor or covered operating environments.

The right model depends on the site’s container volume, stacking requirements, container types, available space and operating conditions.

Conclusion

A reach stacker can be the right equipment for high-volume container operations that require extensive stacking and large open operating areas.

But its full capabilities may not be necessary for every yard.

If your operation has lower container volumes, restricted space, surface loading considerations or different workflow requirements, a straddle carrier may provide a more suitable approach.

At Mobicon Systems, we offer a range of straddle carriers for different container handling and stacking requirements, including specialised handling capabilities available with the 2T and 2TE models.

If you are unsure whether a reach stacker is the right fit for your yard, contact our specialists to discuss your container volume, site conditions, available space, stacking requirements and workflow.

© All rights reserved