Mobicon Systems builds compact straddle carriers and container handlers for food, beverage, and FMCG operations. Handle reefer containers, position loads flush with cool room doors, eliminate loading ramp hazards, and reduce forklift travel during peak despatch and export periods.
Food, beverage, and FMCG operations handle containers under time pressure, in temperature-sensitive environments, and with product protection as a primary concern. Conventional container handling methods create unnecessary risk at every step. Mobicon straddle carriers are built to remove it.
Loading ramps and docks are a documented safety hazard. There have been many incidents where a forklift has fallen from a loading dock or ramp. For food and beverage facilities handling high forklift traffic volumes, eliminating the ramp transition removes one of the most common causes of serious workplace incidents.
Diesel-powered container handling equipment produces exhaust gases that are not appropriate near food storage, cold chain facilities, or production areas. Food safety standards and operational hygiene requirements demand that equipment operating near product does not introduce combustion emissions into the environment.
When refrigerated containers cannot be positioned directly at a cool room or cold store entrance, the temperature chain is interrupted during transfer. Every minute goods spend outside a controlled temperature environment creates risk of quality degradation and cold chain compliance issues.
When containers are unloaded far from where goods are stored, forklifts make repeated long-distance runs across the facility. During seasonal peaks in food exports and FMCG despatch, that congestion compounds, slowing throughput at the point where speed matters most.
Loading and unloading goods at trailer height via ramps increases the risk of product damage from drops, unstable pallet loads, and forklift manoeuvring on an inclined surface. Ground-level container handling eliminates those risks entirely by keeping all work at floor level.
Food processing and production facilities regularly have wet floors and slippery yard surfaces from washdowns, condensation, and spills. Container handling equipment that cannot operate safely in those conditions creates a significant operational constraint in facilities where wet surfaces are routine.
The Mobicon positions containers exactly where your facility needs them — flush with a cool room door, beside a packing line, or close to the goods storage area. One operator handles the full cycle without a loading dock or ramp at any point.
The Mobicon drives over the incoming trailer and lifts the container or reefer unit clear without a dock or ramp. Whether it is a dry goods container or a refrigerated unit, the handling process is identical. The truck is released promptly.
With a 40ft container, the Mobicon can position the unit flush with the cool room or cold store entrance. Goods move directly from the refrigerated container into the temperature-controlled facility without any exposure to ambient conditions during transfer.
The Mobicon positions each container directly beside the relevant storage area, packing line, or despatch bay. Forklift travel distance drops significantly. During peak export and distribution periods, that reduction in forklift movement improves throughput across the whole facility.
Goods are packed and unpacked at ground level rather than at trailer height. There is no ramp to navigate, no height transition for forklifts to manage, and no risk of a loaded pallet becoming unstable on an inclined surface. Product damage from handling is reduced.
The 2HLe and 2TE battery-electric models produce zero exhaust emissions, making them appropriate for use near food storage, production lines, and cool rooms where combustion engine gases are not permitted. Noise output is approximately 40 to 50 per cent lower than a diesel-powered equivalent.
All Mobicons have four driven wheels, giving the machine traction on wet, slippery, and washed-down facility surfaces common in food processing and bottling environments. Operations do not need to stop or be restricted because of wet ground conditions.
Food, beverage, and FMCG operations evaluate container handling equipment against a different set of criteria than general freight. Cold chain protection, emission-free operation, and ground-level handling all matter here in ways they do not in an open yard environment.
| Factor | Mobicon Straddle Carrier | Side-Loader | Reach Stacker | Container Forklift |
|---|---|---|---|---|
| Positions Container Flush with Cool Room Door | ✔ Yes, 40ft containers | ✘ Leaves after delivery | ~ Limited manoeuvring | ~ Limited manoeuvring |
| Zero Exhaust Emissions Near Food Areas | ✔ Electric models available | ✘ Diesel only | ✘ Diesel powered | ✘ Diesel powered |
| Handles Reefer Containers | ✔ All models, same as dry | ✔ Yes | ✔ Yes | ✔ Yes |
| Eliminates Loading Ramp and Dock Hazard | ✔ Ground-level handling only | ✔ No dock needed | ✔ No dock needed | ✔ No dock needed |
| Operates Safely on Wet and Slippery Surfaces | ✔ Four driven wheels | ~ Varies | ~ Varies | ~ Varies |
| Reduces Forklift Travel to Storage Areas | ✔ Container placed at work point | ✘ Fixed placement only | ~ Partial | ~ Partial |
| Yard Surface Protection | ✔ Half the axle load of any competitor | ~ Variable | ✘ High point loads | ✘ High axle loads |
| Operator Licence Required | ✔ No licence required | ~ External operator | ✘ Licence required | ✘ Licence required |
The right Mobicon model depends on your weekly container volume, whether stacking is required, driving distances within your yard, and whether you need to move containers under awnings or inside your facility. Contact a Mobicon Systems representative to confirm the best fit for your operation.
The 2T suits smaller food and beverage operations and is the only model in the range with a bottom-lift design. It operates through standard warehouse roller doors from 3.8 metres clearance, bringing containers inside for protected packing and unpacking away from the weather.
The 2TE is the battery-electric version of the 2T. Zero exhaust emissions make it the right choice for food storage facilities, cool rooms, and production areas where combustion engine gases are not acceptable. Noise output is approximately 40 to 50 per cent lower than a diesel-powered equivalent.
The 2HL is the most widely used Mobicon model for mid-volume food and beverage distribution. It stacks two high to maximise yard storage between seasonal peaks and completes a full load cycle in 2 minutes. The height-adjustable design works under covered loading bays with 5.8 metres of clearance.
The 2HLe is the battery-electric version of the 2HL and is very well suited to use near food storage and food production areas. Zero exhaust emissions mean no combustion gases enter the facility environment, and quieter operation reduces noise exposure for production staff during peak container movements.
The 3H suits large-scale food and FMCG distribution operations where container throughput is high and yard space is at a premium. Three-high stacking and a 2-minute load cycle allow the operation to pre-position and rotate large volumes of containers during seasonal export peaks without expanding the yard footprint.
The 3HE delivers three-high stacking at full throughput with a battery-electric drivetrain. Zero exhaust emissions and quieter operation make it suited to high-volume food distribution facilities with emissions compliance obligations or production areas where noise and air quality are controlled.
The biggest benefit of placing containers on the ground is that loading docks and ramps are no longer required. Dock and ramp incidents are a known safety hazard in food and beverage facilities. Removing them from the handling process protects your team and reduces the likelihood of product damage from forklift incidents at height.
With a 40ft reefer container, the Mobicon positions the unit directly at the cool room or cold store entrance. Goods transfer from the refrigerated container into the temperature-controlled facility without any ambient air exposure. Cold chain integrity is maintained from container arrival to storage.
By placing containers beside the relevant storage area or packing station, forklift travel distance per movement drops significantly. During seasonal food export peaks and FMCG despatch surges, that reduction in internal traffic directly increases throughput without adding equipment or headcount.
The 2HLe and 2TE battery-electric models release no combustion exhaust gases, making them appropriate for operation near food storage, cool rooms, and production areas. Noise output is approximately 40 to 50 per cent lower than a diesel-powered equivalent, reducing noise exposure for production staff working nearby.
A refrigerated container has the same external dimensions as a standard dry container. The Mobicon handles both identically, with no change in equipment or process. That means reefer containers carrying temperature-sensitive food and beverage products are positioned with the same precision and speed as any other container in the yard.
The Mobicon positions 40ft containers flush with the entrance of a cool room or cold store. Goods transfer directly from the refrigerated container into the temperature-controlled facility without any ambient air exposure during the transfer. Cold chain compliance is maintained from the point of arrival.
The Mobicon 2T operates through a standard warehouse roller door from 3.8 metres of clearance and 4.6 metres wide. Goods can be packed and unpacked inside the facility, protected from weather, and closer to storage racks. The 2HL and 2HLe lower their height to work under covered bays with 5.8 metres of clearance.
The same Mobicon that handles dry goods containers also handles reefer units, tank containers for liquids and beverages, and hi-cubes. Your yard operation does not need separate equipment for different container types moving through the distribution centre on the same day.
Food and beverage distribution yards handle high container traffic volumes on concrete and bitumen surfaces. Heavy two-axle container equipment concentrates the full machine and container weight at two points, damaging pavement over time. The Mobicon's axle load is half that of any other container handler, protecting your yard surface investment.
Extreme low axle weights with weight-distributing bogies at each corner spread the load across four points rather than two. That keeps pavement in better condition across a busy distribution yard handling dozens of container movements per day.
The hydraulic lifting system eliminates swinging loads and rope hazards that are common in wire rope-based container handlers. No wire ropes means no rope replacements, no load swing risk, and a straddle carrier that stays stable and controlled through tight areas of the yard.
Four driven wheels provide traction in wet and slippery yard conditions common in food processing and bottling facilities. The machine does not need dry ground to operate safely and reliably.
Equipment downtime in a food or FMCG distribution operation has a direct cost. Mobicon Systems backs every unit with after-sales support designed to minimise downtime and keep your container handling cycle on schedule.
Every Mobicon is backed by a manufacturer's warranty. Your food and FMCG operation has asset confidence from the day the unit is commissioned on site.
Routine servicing uses standard components available through local suppliers. No specialist technician or proprietary parts are required, keeping maintenance simple and cost-effective for food and distribution facilities anywhere in Australia.
Mobicon Systems commissions every unit at your facility and provides certified on-site operator training. Your team learns to operate the machine in your actual yard using your containers and your layout. No official licence is required.
When an issue arises, direct telephone support is available from Mobicon Systems to diagnose and resolve problems quickly. Experienced fitters and basic spare parts are available in most major cities across Australia.
For operations with critical uptime requirements during seasonal peaks, Mobicon can include a tailored spare parts package so critical components are on site before they are needed.
Mobicon Systems offers outright purchase and rental arrangements with a minimum term of two years. Rental suits food and FMCG businesses trialling the equipment or managing capital expenditure across a rental period before committing to purchase.
Talk to a Mobicon Systems specialist about the right model for your container volumes, facility layout, and cold chain requirements. No obligation, just practical advice for your operation.
Yes. The 2HLe and 2TE battery-electric models are very suitable for use near food storage and food production areas because they produce no combustion exhaust gases. They also operate at approximately 40 to 50 per cent of the noise level of a diesel-powered equivalent, reducing noise exposure for production staff working nearby.
Yes. With a 40ft container, the Mobicon can place the container flush with the entrance of a cool room or cold store. A refrigerated container has the same external dimensions as a standard dry container, so the handling process is identical. Goods transfer directly from the container into the temperature-controlled facility without ambient air exposure.
The biggest benefit of placing containers on the ground is that loading docks and ramps are not required. Ramps and docks are a documented safety and damage risk. Working at ground level removes the height differential that forklifts must manage, keeps pallet loads stable throughout, and eliminates the risk of a forklift falling from a dock or ramp during the loading and unloading cycle.
The Mobicon positions each container directly beside the relevant storage area or packing station. That reduces the travel distance between the forklift and the container on every movement. During seasonal food export peaks and FMCG despatch surges, reducing internal forklift travel directly improves throughput without adding equipment or labour.
Yes. All Mobicons have four driven wheels, which provides reliable traction on wet, slippery, and freshly washed facility surfaces common in food processing, bottling, and cold chain environments. Operations do not need to stop or be restricted because of wet ground conditions.
Even operations with lower container volumes can benefit from the base model, the Mobicon 2T. The right model depends on total weekly container movements, whether stacking is required, internal driving distances, and whether you need to move containers under awnings or inside your building. Contact Mobicon Systems for a specific recommendation based on your facility.
No. A refrigerated container has the same external dimensions as a standard dry ISO container. The Mobicon handles both identically. There is no change in equipment, process, or operator requirement when switching between reefer units and standard dry containers in the yard.
Yes. Mobicon Systems offers rental arrangements with a minimum term of two years. Rental suits operations that want to trial the equipment or manage capital expenditure before committing to an outright purchase. For seasonal peak support, contact Mobicon Systems to discuss the options available for your situation.
© All rights reserved