Mobicon Systems builds compact straddle carriers and container handlers for importers and exporters across Australia. Handle 20ft and 40ft ISO containers on site without side-loaders, loading docks, or double spots, and put transport costs back under your control.
Side-loaders work for low container volumes. Beyond 7 to 10 containers per week, the cost of each delivery compounds into a significant and uncontrolled expense. Mobicon straddle carriers eliminate that variable cost and give your operation full control over container handling.
Side-loader delivery costs considerably more per container than a standard skel trailer. For businesses moving more than 7 to 10 containers per week, that premium adds up to a large recurring cost that is difficult to justify against a single capital investment.
When a truck waits at a loading dock while containers are swapped, demurrage charges accrue quickly. Trailers left uncoupled at a dock to support a container tie up expensive equipment and create avoidable holding costs that appear on every invoice.
Side-loaders need a clear double spot to set down a container, which limits where containers can be placed and locks in an inefficient yard layout. That rigidity reduces storage density and pushes containers further from where goods need to be accessed.
Once a side-loader drops a container, it leaves. If the position does not suit your operation, the container stays where it is. There is no ability to move it closer to storage racks or despatch points without hiring another service.
When containers cannot be moved to a sheltered area, your team packs or unpacks outdoors in whatever conditions the day brings. That slows the process, increases handling time, and raises the risk of goods damage during wet or extreme weather.
Using a trailer as a static support rack at a loading dock is one of the most costly ways to store a container. That trailer cannot be used for freight while it sits idle, tying up capital that could be working elsewhere in the business.
A Mobicon straddle carrier gives your team complete control over container arrivals and departures. The truck pulls in, the exchange happens, and it is back on the road before demurrage has time to become a concern.
The skel trailer reverses in and the Mobicon operator lifts the incoming container clear within minutes. The driver does not wait at a dock. No double spot is needed, so any clear area of the yard works as a set-down point.
The Mobicon places the container directly beside the storage rack, despatch area, or covered packing bay where goods will be accessed. Forklift travel distance drops and handling time falls with every movement.
The Mobicon picks up the pre-packed outbound container and places it on the waiting trailer. The full exchange takes under 10 minutes. The driver leaves without waiting at a dock, and demurrage does not apply.
After delivery, containers can be moved at any time. Place one under a covered area for packing, stage another near the despatch bay, and hold a third in the yard. Your team controls placement without any external dependency.
The same Mobicon handles standard ISO containers, reefers, flat racks, and tank containers. You do not need separate equipment for different container configurations. One machine covers your full import and export container mix.
If you still want to use existing docks, inexpensive loading tables can be placed in front of them. The Mobicon loads containers onto the tables so the dock can be used without a trailer standing by as a permanent support rack.
Most import and export businesses compare the Mobicon against continued side-loader hire or heavy container handling equipment. Here is how each option stacks up across the factors that drive cost and productivity.
| Factor | Mobicon Straddle Carrier | Side-Loader Hire | Reach Stacker | Container Forklift |
|---|---|---|---|---|
| Cost Structure | ✔ Fixed capital cost | ✘ Variable per movement | ~ High CAPEX + running costs | ~ Moderate CAPEX |
| Double Spot Required | ✔ No double spot needed | ✘ Always requires double spot | ✔ No double spot | ✔ No double spot |
| Container Repositioning After Delivery | ✔ Anytime, anywhere on site | ✘ Leaves after delivery | ✔ Yes | ✔ Yes |
| Truck Turnaround Time | ✔ Under 10 minutes | ~ Varies by scheduling | ✔ Fast | ✔ Fast |
| Handles All ISO Container Types | ✔ Including reefers, flat racks, tanks | ✔ Yes | ~ Standard ISO only | ~ Standard ISO only |
| Yard Surface Protection | ✔ Lowest axle loads in the world | ~ Variable | ✘ High point loads | ✘ High axle loads |
| Operator Licence Required | ✔ No licence required | ~ External operator | ✘ Licence required | ✘ Licence required |
| ROI Timeframe | ✔ Under 1 year at 7+ containers/week | ✘ No asset value created | ~ Multi-year payback | ~ Multi-year payback |
Every Mobicon handles all standard ISO container types including reefers, flat racks, tank containers, and hi-cubes. The right model depends on your weekly movement volume and whether stacking is required in your yard.
The 2T uses a bottom-lift design suited to lower-volume import and export operations. It handles open-top containers and flat racks, operates through standard roller doors from 3.8 metres clearance, and completes a container lift in 4 to 5 minutes.
The 2TE is the battery-electric version of the Mobicon 2T. It delivers the same bottom-lift capability and indoor clearance performance with zero exhaust emissions, making it the right choice for enclosed facilities or emission-sensitive sites with lower container volumes.
The 2HL is the most common choice for mid-to-high volume import and export businesses. It completes a truck exchange in around two minutes, stacks one container over another to increase yard density, and lowers its height to work under covered bays with 5.8 metres of clearance.
The 2HLe delivers full 2HL capability with a battery-electric drivetrain. Zero exhaust emissions and lower running costs make it the right choice for enclosed facilities, sustainability reporting, or operations focused on minimising fuel spend.
The 3H is built for high-volume import and export operations where yard space is limited and weekly container throughput is intensive. Three-high stacking delivers maximum storage density on standard bitumen or concrete surfaces without damaging the pavement.
The 3HE is the battery-electric version of the Mobicon 3H. It delivers three-high stacking at high throughput with zero exhaust emissions, suited to intensive operations that require maximum yard density alongside sustainability or emissions compliance.
Every side-loader hire adds a cost per movement with no residual value. A Mobicon converts that ongoing variable spend into a single capital investment your team operates on your schedule, without booking windows or availability constraints.
Extreme low axle weights with weight-distributing bogies at each corner mean the Mobicon operates safely on light or unprepared yard surfaces. There is no need to upgrade pavement before deployment, and no ongoing surface damage to repair.
The Mobicon uses a hydraulic lifting system with no wire ropes. That eliminates swinging loads and rope hazards entirely, keeping the straddle carrier stable and controlled on slopes and through tight yard areas. There are no wire rope inspections to schedule and no rope replacements to budget for. Safe operation is built into the design itself.
No separate equipment licence is needed to operate a Mobicon. Any trained yard staff member can run it. Combined with low fuel consumption and low maintenance requirements, the total cost of ownership stays predictable from year one.
Import and export operations work with a mix of container types across different shipments. The Mobicon handles all of them without requiring separate equipment for each configuration. That simplifies your yard operation and reduces the cost of managing a mixed container fleet.
Every Mobicon handles standard 20ft and 40ft ISO containers, hi-cubes, and refrigerated reefer containers. Whether you are handling perishable imports, chilled exports, or standard dry freight, the same machine covers the full range without modification.
The 2T uses a bottom-lift design that supports flat racks and open-top containers carrying loads that extend above the container rim. It is the right choice for oversized cargo, machinery imports, or bulk material that cannot be containerised in a standard box.
All Mobicon models handle tank containers used for liquid bulk imports and exports. The same straddle carrier that handles your dry freight also moves your tank fleet, keeping your yard operation consistent regardless of the container configuration arriving that day.
Reach stackers and container forklifts concentrate the full combined weight of machine and container across two axles. Over time that damages concrete and bitumen yard surfaces common at import and export facilities. Mobicon's four-axle design spreads that load across four points, protecting your pavement and reducing long-term maintenance costs.
Most import and export yards are built on standard concrete or bitumen. Heavy two-axle container equipment cracks and deforms those surfaces over time, creating repair costs and safety hazards in your working yard.
The Mobicon's four-axle configuration produces the lowest axle loads of any container handler in the world, making it compatible with most standard yard surfaces without requiring pavement upgrades or load-bearing assessments.
Savings on potential yard pavement repairs alone can justify part of the investment. One operator of Mobicon Systems equipment reported $50,000 per year in avoided pavement repair costs after switching from a heavy forklift.
Mobicon Systems backs every unit with a full after-sales programme. Equipment downtime in an import or export operation has a direct cost, so support is built into every deployment from commissioning day.
Every Mobicon is backed by a manufacturer's warranty. Your operation has asset confidence from the day the unit is commissioned on site.
Routine maintenance uses standard components available through local suppliers. No specialist technician, no proprietary parts, and no extended downtime waiting on a service agent to travel to your site.
Mobicon Systems commissions every unit at your facility and delivers certified on-site operator training. Your team learns to run the machine in your actual yard using your containers and your layout from day one.
When an issue arises, direct telephone support is available to diagnose and resolve problems quickly. Mobicon Systems has experienced fitters in most major cities, reducing response time and keeping downtime short.
For businesses with critical uptime requirements or sites in locations with limited local supplier access, Mobicon can include a tailored spare parts package. The right components are on site before they are needed.
Mobicon Systems offers outright purchase and rental arrangements with a minimum term of two years. Rental suits operations that want to trial the equipment or smooth capital expenditure across a rental period before committing to purchase.
Sadleirs Logistics operates a national transport network across Australia. At one depot, they ran a drive-through warehouse with an awning along the side of the building. Their heavy forklift could only position two containers under the awning and one outside the doors at any time.
When a container under the awning was cleared, the outside container had to be moved before a replacement could take its place. That double-movement cycle added time to every container exchange and ate directly into the depot's productivity.
After consulting with Mobicon Systems, Sadleirs replaced the forklift with a Mobicon 2T straddle carrier. The yard was rearranged to hold four containers under the awning simultaneously. Any finished container could be swapped without moving others first, and containers could also be placed inside the warehouse for improved security and weather protection.
"Previously our docks were capable of unloading 2 containers on 2 trailers at any one time. We can now unload 4 to 5 containers at the same time which spreads our labour costs and increases our productivity."
Michael Miller, QLD State Manager, Sadleirs TransportTalk to a Mobicon Systems specialist about the right model for your container volume, yard layout, and budget. No obligation, just practical advice based on your operation.
Generally, once you are moving more than 7 to 10 containers per week, the cost difference between side-loader delivery and a standard skel trailer becomes significant enough to justify a Mobicon investment. Some operators achieve a full return on investment in under one year at those volumes.
The Mobicon 2HL and 3H complete a full container exchange in approximately two minutes. The 2T takes 4 to 5 minutes. From truck arrival to truck departure, the full cycle including staging the outbound container typically takes under 10 minutes, eliminating demurrage exposure entirely.
Yes. Every Mobicon handles all ISO-configured containers including refrigerated reefer units. The same machine that handles your dry freight also moves your reefer containers, so your operation does not need separate equipment for chilled or frozen cargo.
Yes. All Mobicon models handle tank containers. The Mobicon 2T also handles flat racks and open-top containers carrying loads that extend above the container rim, making it suitable for oversized cargo and bulk imports that cannot be transported in a standard ISO box.
A Mobicon removes the container from the trailer immediately on arrival and places a pre-loaded outbound container on the truck within minutes. The driver is released without waiting at a dock, and there is no need to leave a trailer uncoupled on site as a container support rack. Both common sources of demurrage and detention charges are eliminated.
Yes. Mobicon Systems offers rental arrangements with a minimum term of two years. Rental suits operations that want to manage capital expenditure across a rental period, trial the equipment before committing to purchase, or supplement an existing fleet during high-volume periods.
Mobicons have a strong reliability record, built on proper operator training and locally trained fitters for routine maintenance. In the event of a breakdown, direct telephone support is available from Mobicon Systems. Experienced fitters and basic spare parts are available in most major cities, with spare parts packages recommended for sites in remote or regional locations.
Yes. If you want to use existing docks, inexpensive loading tables placed in front of them allow the Mobicon to load and unload containers at dock height without a trailer permanently stationed as a support rack. You retain the flexibility of dock-height access without the trailer holding cost.
© All rights reserved