Mobicon 3H Feature Spotlight
The Mobicon 3H is built for operations where maximising storage capacity is a priority. By stacking containers one-over-two, the 3H enables logistics facilities, ports, and industrial yards to store more containers within the same footprint, helping make better use of available space as container volumes grow.
Its four-axle configuration distributes load across eight tyres, helping reduce point loading on suitable yard surfaces. Combined with hydraulic lifting, top-lift container handling, and hydraulic steering, the 3H provides the stacking height and manoeuvrability needed for higher-density container operations.
With a 35-tonne safe working load and a specified two-minute cycle from vehicle to stacking, the Mobicon 3H is designed for operations that need higher storage density without moving to heavier container handling equipment.
Contact us today to transform your container handling operations with the Mobicon 3H Straddle Carrier.
"*" indicates required fields
✓ 2-year / 2,000-hour full warranty + 1-year major component coverage ✓ Free yard assessment ✓ Operator training included
Why Mobicon 3H
Stack containers one-over-two to increase storage density within the same yard footprint. The 3H is the only Mobicon model in the supplied range designed for three-high container stacking.
The four-axle design distributes load across eight tyres, helping reduce point loading compared with heavier container handling equipment.
The 20'/40' telescopic spreader is designed for compatible ISO containers, while cab-controlled handling allows the operator to remain inside the cabin during container connection and lifting.
A specified two-minute cycle from truck pickup to stacking supports efficient container movement in higher-throughput operations.
Hydraulic cylinders provide controlled lifting without chains or wire ropes, helping keep the load stable during stacking and movement.
No operator licence is needed to run any Mobicon model. Any trained team member can get behind the wheel, reducing compliance hurdles and giving your yard more flexibility without the added labour costs.
The Mobicon 3HE is the battery-electric counterpart to the 3H, delivering the same three-high stacking capability with zero exhaust emissions and quieter operation. It provides an electric option for operations where emissions, noise, or sustainability requirements influence equipment selection.
The Mobicon 3H requires 11.5 metres of overhead clearance in the stacking area to complete a full three-high stack. Confirm available clearance before specifying the machine for enclosed or partially covered areas.
The Mobicon 3H is 5.22 metres wide externally and requires a minimum aisle width of 6.5 metres to operate and manoeuvre safely. Contact Mobicon Systems if your site has tighter constraints. Our team can assess the layout and advise on the best configuration for your yard dimensions.
Under the stated comparison, the Mobicon 3H carrying a 25-tonne container applies approximately 14 tonnes per axle, compared with up to 100 tonnes for a reach stacker under load. Actual suitability depends on the yard surface and operating conditions.
The Mobicon 3H handles hi-cube containers and any container with standard corner castings positioned at 20' and 40' intervals. Containers that do not carry corner castings at these positions, which includes most 45-foot units, are not compatible with the telescopic spreader. Contact Mobicon Systems to confirm compatibility for any non-standard container type.
Yes. The Mobicon 3H is suited to larger port environments than the Mobicon 2HL. Its more powerful 129 kW engine, larger pumps and wheel motors, heavier construction, and faster lift speed of 7 metres per minute when raising and 5 metres per minute when lowering make it capable of sustaining the higher throughput that larger regional ports and busy terminal areas demand. Contact Mobicon Systems to discuss whether the 3H is the right fit for your specific port environment.
The Mobicon 3H is designed for single-operator operation, with lifting, steering, spreader control, and safety functions controlled from the enclosed cabin.
Yes. The Mobicon 3HE is the battery-electric counterpart to the Mobicon 3H.
Confirmed fuel consumption figures are still being compiled. Based on current estimates, the Mobicon 3H uses approximately 9.5 litres per hour under standard operating conditions. Contact Mobicon Systems for the latest verified fuel consumption figures for your application.
The Mobicon 3H is designed for an operational lifespan exceeding 15,000 hours. Service intervals are set at 250 hours, with longer intervals possible depending on operating conditions and usage patterns. Mobicon Systems can advise on the full service schedule as part of the purchase consultation process.
Pricing depends on configuration and site-specific requirements. Contact Mobicon Systems for a tailored quotation.
Australian-owned and engineered for over three decades. Trusted by logistics operators, defence agencies, and manufacturers across the globe.
Not sure which model suits your yard?
Our specialists will help you find the right fit.
© All rights reserved